A Microtrac cég BLUEWAVE készüléke helyes, megbízható és ismételhető szemcseméret analízissel szolgál sokféle alkalmazásban felhasználva a Mie-kompenzáció bizonyított módszerét a gömbszerű és a módodított Mie-számítást a nem gömbszerű szemcsék esetén.
A Bluewave készülék felülmúltatalan felbontása révén az 1 mikron alatti méretű szemcsék mérésére van optimalizálva. A BLUEWAVE méréstartománya 0.01 - 2800 mikron közötti.
A Microtrac cégnél már hagyomány az innovatív megoldások bevezetése a fényszórásos technológiával végzett szemcseméretanalízis területén. A BLUEWAVE lézerfényszórás analizátor követi ezt a hagyományt. A "Tri-laser" technológiát hasznosító BLUEWAVE helyes, megbízható és ismételhető szemcseméret adatokkal szolgál a K+F feladatoktól a gyártási és minőségellenőrzési alkalmazásokig. A BLUEWAVE kielégíti az ISO 13320-1 "Particle size analysis – light diffraction methods" szabvány összes követelményét.
Jellemzők
- 3 lézeres, kék / vörös, több detektoros, több szórási szögű optikai rendszer
- valódi kék lézerek (nem LED-ek)
- gömbszerű szemcsékhez Mie-kompenzációt, nem gömbszerűekhez módosított Mie-számítást alkalmazó algoritmus
- 0.01 - 2800 mikron közötti méréstartomány
- nedves és száraz mérés
- zárt optikai rendszer csak minimális karbantartást igényel, csökkennek a leállási idők
Előnyök
- kék lézerek használatával és az ezzel járó felbontásnövekedéssel lényegesen javul az 1 mikron alatti mérések helyessége
- módosított Mie-számítás lehetővé teszi nem gömbszerű szemcsék helyes mérését
- nedves és száraz üzemmód közötti egyszerű átváltás csökkenti a leállási időt
- rögzített helyzetű detektorok tartósságot és megfelelő pozícionálást biztosítanak
- kis helyigény az értékes laboratóriumi területből
Tipikus alkalmazások
Különböző anyagokhoz alkalmazható: italok, biotechnológia, vegyszerek, élelmiszer, geológia / bányászat, gyógyászat / gyógyszergyártás, fémporok, fémek, pigmentek, polimer műanyagok, porlakkok, ...
vegyszerek
akkumulátor anyagok
porok
Látogassa meg Alkalmazási adatbankunkat a szemcseanalízis legjobb megoldása érdekében!
Szemcseméretanalizátor BLUEWAVE Műszaki adatok
| Measuring range | 0.01 µm - 2.8 mm |
|---|---|
| Measuring principle | Laser diffraction |
| Lasers | 1x Red 780 nm / 2x Blue 405 nm |
| Laser power | Red laser 3 mW nominal Blue lasers 4 - 8 mW nominal |
| Detection system | Two fixed photo-electric detectors with logarithmically spaced segments placed at correct angles for optimal scattered light detection from 0.02 to 165 degrees using 151 detector segments. |
| Data | Volume, number and area distributions as well as percentile and other summary data |
| Data format | Stored in ODBC format in encrypted Microsoft Access Databases to ensure compatibility with external statistical software applications. |
| Data integrity | Data integrity may be ensured using FDA 21 CFR Part 11 compliant security features including password protection, electronic signatures and assignable permissions |
| Measuring time | ~ 10 to 30 seconds |
| Power requirements | AC input: 90 - 132 VAC, 47 - 63 Hz, single phase 200 to 265 VAC, 47 - 63 Hz, single phase |
| Power consumption | 25 W nominal, 50 W max. (depending on options installed) |
| Environmental conditions | Temperature: 5° to 40° Celsius (50° to 95° Fahrenheit) Humidity: 90% RH, non- condensing maximum Storage temperature: -10° to 50° Celsius (14° to 122° Fahrenheit) (dry only) Pollution: Degree 2 |
| Physical specifications | Case Material: Steel and impact resistant plastic Exterior surfaces are finished with corrosion resistant paint or plating |
| Dimensions (W x H x D) | ~ 560 x 360 x 460 mm (22 x 14 x 18 in) |
| Weight | ~ 27 kg (60 lbs ) |
| Eductor air supply | 100 psi (689 kPa) maximum pressure 5 CFM (8,5 m3/h) at 50 psi (345 kPa) minimum flow rate Free of dry contaminants, moisture and oil |
| Vacuum | Vacuum must exceed 50 CFM |
Szemcseméretanalizátor BLUEWAVE Letöltések
Termék adatlap Bluewave
Product Overview
10 Most Common Errors in Particle Analysis - And How to Avoid Them
Particle analysis is an integral part of the quality control of bulk materials and is routinely performed in numerous laboratories. The methods used have often been established for years and are hardly ever questioned. Nevertheless, the procedure should be critically reviewed from time to time because a whole series of sources of error can negatively influence the results of a particle analysis. This white paper is intended to provide food for thought to make methods for particle characterization more reliable and accurate.
21 CFR Part 11 Compliance Matrix for Microtrac Instruments
This document explains how Microtrac FLEX software has been designed to satisfy and comply with regulations in 21 CFR Part 11 for electronic records and electronic signatures.
A Conceptual, Non-Mathematical Explanation on the Use of Refractive Index in Laser Particle Size Measurement
An explanation of Mie scattering and how Microtrac laser diffraction analyzers evaluate scattering signal from small particles.
Accuracy and Precision of Microtrac Particle Analyzers
Accuracy and precision have distinct meanings. Generally, accuracy refers to the ability of an analytical device to provide a measurement that is within a defined error from an established, true, and verifiable value. Precision is a measure of the recurrence of a value whether it is accurate or not. Two types of precision can be described: repeatability and reproducibility. In terms of particle size measurement, repeatability refers to the ability of an instrument to repeat its own measurement while the same sample resides in the circulating system. Reproducibility, on the other hand, is related to the comparison of two or more instruments in which representative (repeatable sampling assumed) samples are introduced to each of the instruments. Repeatability is statistically more variation-free than reproducibility because a single instrument measures the same recirculating sample.